S-15 Switching mode power supply ( smps)

1.Low price and high reliability 2.105 output capacitor 3.AC input power suitable for the world 4.High efficiency

S-15 Series

1.Low price and high reliability 2.105 output capacitor3.AC input power suitable for the world4.High efficiency and low operation temperature5.Soft-start current can reduce the AC input impact effectively6.With short-circuit and overload protection 7.Compact size, light weight8.100% full-load burning test9.Installed with EMI filter, minimum wave ModelSpecification S-15-5 S-15-12 S-15-24 DC output voltage 5V 12V 24V Output voltage error (Note2) ±2% ±1% ±1% Rated output current 3A 1.3A 0.7A Output current rage 0-3A 0-1.3A 0-0.7A Wave and noise(Note3) 50mVp-p 50mVp-p 100mVp-p Inlet stability(Note4) ±0.5% ±0.5% ±0.5% Load stability(Note5) ±1% ±0.5% ±0.5% DC output power 15W 15.6W 16.8W Efficiency 65% 68% 72% Adjustable range for DC voltage ±10,-5% ±10% ±10% AC input voltage range 85~132VAC/170~264VACselected by switch Input current 0.5A/115V 0.25A/230V AC impulse current Cold-start current 15A/115V 30A/230V Leakage current <0.5mA/240VAC Overload protection 105%~150%Type current limiting ;Reset auto recovery Over-voltage protection …… High-temperature protection …… Temperature coefficient ±0.02%(0~5) Setup rise hold up time 200ms,100ms,30ms Vibration 10~500Hz,2G 10min./1cycle,Period for 60min,Each axes Withstand voltage Input and output interva 1.5KVAC,Input and enclosur 1.5KVAC,Output and enclosure 0.5KVAC Isolation resistance Input and output interval,Input and enclosure,Output and enclosure 0500VAC/100M Ohms Working temperature and humidity -10~+60,20%~90%RH Store temperature and humidity -20~+85,10%~95RH Overall dimension 99*97*35mm Weight 0.3Kgs Safety standards Meet UL1012 EMC standards …… Note:1.The testing condition for the parameter above is 230VAC input, rated load,25 70%Rh,Humidity2.Error,include the setting error, line stability and load stability.(Note:5)3.Wave test:adopting“A12”double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.5.Load stability test:The load is from 0% to 100%,others 60%.6.C2,3,11must be knocked down.

S-15 Switching mode power supply ( smps)